replaced broken hv diode and checked operations. ck ok; used 1 W11256462 (DIODE) from stock

Fixed element connection under unit

Replaced shorted fuse and heater and checked operation ok

Found faulty reservoir part order ; ordrng 1 W11482382 (Reservoir) and 1 W11482383 (Valve)

Found faulty Gearcase and basket part order ; ordrng 1 W10752283 (Washplate) and 1 W10752719 (Basket) and 1 W11454734 (Gearcase)

Found loose nut on cam. Tightened nut. Unit is now working as intended no leaks at this time

Replaced faulty control board and spark module. Unit is now working as intended no leaks at this time

Assisted Tech JP with repair. Ran test cycle and unit checks ok and no leaks detected.

Checked unit and replaced misformed cooktop. Unit checks ok. Talked to Shephatiah at Trade Oartners and issued Auth# k18tne1nl2

Order parts reschedule with customer2wgt; ordrng 1 279318 (terminal) and 1 279393 (screw) and 1 WP3397659 (block-term)

Checked unit for leaks with leak detector meter and none found. Ran test cycle and unit checks ok.

Replaced faulty mullion all ok no problems

Replaced faulty pump assembly all ok no problems

"F2e1 f6e3 needs parts; ordrng 1 W10833003 (Control) and 1 W10849058 (Panel) and 1 W11233069 (Burner assembly) and 1 WP338906 (Sensor) and 1 WP3391912 (Thrmfix) and 1 WP8573713 (Cutoff) and 1 W10909685 (Fuse), states that autho needed"

Replaced parts list

F6E1 codeWill order control board and console ; ordrng 1 W11672039 (Control board) and 1 W11660284 (Console) and 1 W11627526 (Jumper)

"Knocked on customer home and Mr. Came out Asked me if I had been the one that came pout last time, I answered yes I was. He asked so what will happen if u dont find anything again? I answered, well sir I can not produce the leak for you. All I can do is check again for leaks. He then went from zero to 100 outraged. He started getting Lous and getting louder screaming you.You aint leaving their house mother fucker with out finding the leak. I tried to leave the house but he blocked the pathway with his body then with a chair. He kept screaming you aint leaving mother fucker. I was in shock and had to think quickly. All i could say is that i would call the police but that just made him angrier. He started coming towards me. I tried to pull cell phone n record him but the situation was so fast it would allow me to. I told him he better not touch me if not i would press charges. He finally just said get the fuck out my house mother fucker. And followed behind me and screaming load enough for neighbors to hear. I took a picture of him and called WP trade team and safety to document. SR# 7737403041"

"Found back panel frozen Will order heater/harness , diffuser, thermistor ; ordrng 2 WPW10384183 (thermistor)s and 1 W11645127 (Diffuser) and 1 W11650662 (Heater/harness)"

"Needs motor,wheel,heater,cut off,belt ; ordrng 1 W11234001 (Motor) and 1 W11327190 (Wheel) and 1 WP3387747 (Heater) and 1 280148 (Cut off) and 1 661570V (Belt)"

replaced freezer door

Fixed loose screw to track

need cnts; ordrng 1 w11374900 and 1 w11428994

need mtr; ordrng 1 w10884561 and 1 w10169511

found and replaced worn parts

"needs mtr and cnt, est pending, est pic taken"

assisted Donnie

replaced shorted led modules and checked operations. ck ok; used 2 W11462342 (MODULE) from stock

order parts 2man 2wgt with Donnie; ordrng 1 W11460946 (pump/motor assy.) and 1 W11632704 (control board)

Ice maker had error code of E5. Will need a new ice maker. Also customer wanted me to add to quote led module. I gave customer quote and he will think about continuing with repairs.

Upon arrival unit was not turning on. I then turned dishwasher switch and unit is now working as designed. Customer was not aware of dishwasher switch.

Replaced led module

"Replaced controls, heater harness and thermistor"

Found freezer airflow cover uninstalled Installed and now allowing for proper air entering the fridge compartment Uploaded pictures for documentation

"Unit will need gearcase, clutch, and slider.Gave customer a quote and she will buy a new washer instead."

"replaced blown fues and dl auth# is tpb12108l2.0; used 2 W10138793 (FUSE), and 1 8206232A (BULBLIGHT) from stock"

bad harness dl auth# is k18t8o0xl2; ordrng 1 w11330869 (harness)

Checked unit and replaced shorted switch. Ran test cycle and unit checks ok.

"Replaced compressor,evacuated system and charged unit"

Found bad display.; ordrng 1 Wpw10145531 (Power supply) and 1 Wpw10464535 (Display)

Found bad trim; ordrng 2 W10883315 (Glass bracket)s and 1 W11620704 (Outer glass)

Fixed wire at socket

replacd bad control; used 1 w11552018 (CNTRL-ELEC) from stock

Reinstalled and adjusted belt ran test all operations normal.

found and replaced torn seal

need disp; ordrng 1 w11570272 and 1 w11553795

replaced damaged pnl

Replaced board and ui. Operations are correct now

Replaced faulty elements. Unit is now working as intended no leaks at this time

Replaced faulty drive system parts all ok no problems

checked unit found the water filter stopped up the customer will replace the filter

replaced leaking pump/motor asmy

checked unit adjusted the freezer dor gasket and checked operation

replaced restricted drier and recharged the unit

Found shorted ignitor. Removed and replaced ignitor and checked operation

replaced shorted control

found and replaced worn parts

SR# 7737456268 used gasket different issue; used 2 W11169728 (Gasket) from stock

Replaced part. Returning other part not needed. All operations are correct now. Customer approved. Customer to follow instructions on owners manual/use and care guide.

Adjust evaporator ran test all test normal.

Replaced high limit fuse ran test all operations normal.

Checked unit and reattached evap thermistor. Unit checks ok.

Checked unit and replaced open evap thermistor and control box. Unit checks ok.

Replaced bad bin stat; used 1 W10511923 (Bin stat) from stock

Ran diagnostics reset controls all test normal.

Called technical support Steve Need to have customer uninstall to check amperage on individual legs of for amperage spikes past the 50 amp breaker.Customer will call an electrician out first to check amperage from the electrical panel to make sure it will not spike past 50 amps during operation. 7737463272Tech will have office call back on 10-6-23 to check status of the electricians findings on the amperage checks.; O-emld tckt

bad pump; ordrng 1 1901A (pump)

checked and cleared block of ice from icemaker

Checked unit and replaced open bin thermistor. Unit checks ok.

Tub bouncing around and damaged parts. Ordering parts. Four wgt. ; ordrng 1 W11550886 (Tub ring) and 1 W11172199 (Basket) and 1 W11454372 (Gearcase) and 1 W11217817 (Suspension)

NOTHING IS LEAKING. repaired blue wire to drain pump. All operations are correct. Customer to monitor unit.

"Customer aware that this is a household plumbing issue with their waterline connected from home to the dishwasher. Advised for plumber or if theyre handy, they can replace that piece themselves.Customer is not happy that whirlpool does not fix household plumbing."

Oven not working. Ordering part. ; ordrng 1 W11620481 (Ctrl elec)

Replaced parts. CUSTOMER AWARE TO CLEAN VENTS.; used 2 WPW10314173 (Roller) from stock

Order drain pump; ordrng 1 1901a (Pump)

Replaced parts. All operations are correct now.

"Replaced freezer fan motor, board,wire harness and thermistor"

Replaced leaking water valve. Operations are correct now

replaced bad suspension

"SPOKE TO TECHLINE. AGAIN. KURT, DOCUMENTED THAT UNIT IS WORKING AS DESIGNED. ICE MAKER AND WATER IS NORMAL. CUSTOMER CONTINUES TO HAVE FREEEZER TEMPERATURES AT NEGATIVE EIGHT FAHRENHEIT CUSTOMER CONTINUES TO NOT FOLLOW INSTRUCTIONS ON ADJUSTING TEMPERATURES. SR# 7736665624"

replaced bad harness

replace drip pan

"elderly did not know how to operate unit, cycled ok"

need im; ordrng 1 w10873791

customer has unit in the garage and needs a new water lin e to run to this unit

bad dispenser; ordrng 1 w11412300 (dispenser)

checked and cleared kinked pressure hose

replaced parts

checked and all function worked ok

Need to order; ordrng 1 W11626124 (ICEMAKER) and 1 W11629974 (CNTRL-ELEC) and 1 W11629974 (CNTRL-ELEC)

Needs parts; ordrng 2 w11113654 (Sound pad)s and 1 WPW10479155 (Control)

replace led mld

Found power supply mis wired. Checked operation and function of unit. I love your.Dryer is functioning as designed. Customer to call an electrician

Replaced broken knob and switch

Found cracked blower wheel. Removed and replaced blower wheel and motor. Checked operation

Ran DW with home owner and builder both presentDid not find any leaks coming from unitIf moisture is getting thru under sink is from another source Builder will have plumber come out and inspect

CUSTOMER IS UNDERLOADING ONLY TWO JEANS IN WASHER. I RAN A LOAD OF SIX TOWELS. COULD NOT DUPLICATE ISSUE. UNIT WORKING AS DESIGNED. CUSTOMER IS NOT HAPPY THAT I SHOWED THEM WHERE TO LOAD AND EXPLAINED PROPER USE AND CARE OF UNIT.

order part 2man 2wgt with Donnie;

checked unit reconnected wire to the drain pump

order parts 2man 2wgt with Donnie; ordrng 1 W11478526 (control panel) and 1 W11624943 (control board) and 1 W11568984 (wiring harness)

adjusted and tightened loose screws on rear panel and pedestal and re-leveled washer and ran test cycle. test ok