replaced shorted control board and ran test cycle. test ok; used 1 w11603810 (control board) from stock

replaced shorted control board per special project s153eb and ran test cycle. test ok

checked unit and found vent restriction. performed electronic vent tester and did not pass. disconnected vent hose from back of dryer and all dryer operations checked ok. advised customer to get venting profesionally cleaned.

tightened loose drive cam nut and checked operations. ck ok

customer had inspector come out and said unit was unlevel and console was loose. neither was the case un it s perfectly level and console was correct and all screws tight. ck ok